Search results for "Anodic Film"

Structural and compositional analysis of anodic films on Al-Nb sputter-deposited alloys

2006

The photoelectrochemical behavior of anodic films on Al alloys, containing titanium, tantalum, and tungsten (valve metals), has been studied as a function of alloy composition and anodizing conditions. Photocurrent spectroscopy has been used to get information on bandgap and the flatband potential values of different mixed oxides. Both insulator-like and semiconducting behavior has been observed for anodic oxides grown on Al-W and Al-Ti alloys dependent on alloy initial composition. Optical bandgap values, Eg,opt, of different oxides are in accordance with predictions based on the correlation between Eg,opt and the difference of electronegativities of the oxide constituents, indicating pote…

The effect of hydration layers on the anodic growth and on the dielectric properties of Al2O3 for electrolytic capacitors

2014

Hydrous films were grown on high purity and cubicity Al foils for electrolytic capacitors in deionized water, ethylene glycol - deionized water and in glycerol - deionized water for different immersion times. According to the X-ray diffraction patterns the hydration treatment allowed to grow a pseudo boehmite layer on Al surface whose morphology is appreciably affected by the bath composition. Capacitance measurements and photoelectrochemical findings suggest that a more compact barrier layer forms during the immersion in alcohol containing solutions. The hydration in water allowed to save energy and to prepare more blocking oxide films. The beneficial effect of hydration in hot water on th…

Kinetic of growth and physico-chemical characterization of anodic films on magnesium

2008

Photoelectrochemical monitoring of rouging and de-rouging on AISI 316L

2017

Electrochemical conditions for inducing rouging on surface of AISI 316L in quasi neutral aqueous solution are studied. Potentiostatic polarization at 0.6 V vs. SSC at pH ∼ 7 allowed growth of colourless passive films with a band gap slightly lower than that estimated for the oxide grown on the SS surface by air exposure due to chromium dissolution. Under stronger anodic polarization (UE = 1.5 V vs. SSC) coloured passive films are formed, mainly constituted by iron oxide according to their band gap (Eg = 2.0 eV). Etching in citric acid at 60 °C results to be effective in removing rouging.

Photoelectrochemical evidence of inhomogeneous composition at nm length scale of anodic films on valve metals alloys

2016

Abstract Anodic films of different thickness (∼30 nm and 70 nm) were grown by anodizing sputtering-deposited Ta-19at% Al to different formation voltages. N incorporation into the anodic films was inducing by performing the anodizing process in ammonium containing solutions. Layered anodic films were prepared by a double formation procedure with a first anodizing step in ammonium biborate solution and second anodizing step in borate buffer solution, or vice versa. Glow Discharge Optical Emission Spectroscopy was employed to show the distribution of N across the oxide. Photoelectrochemical measurements evidenced a red shift of the light absorption threshold due to N incorporation. A model was…

Electrochemically-induced TiO2 incorporation for enhancing corrosion and tribocorrosion resistance of PEO coating on 7075 Al alloy

2018

Abstract 7075 Al alloy was PEO-treated in a silicate based electrolyte containing 3 g l-1 potassium titanyl oxalate using unipolar and bipolar pulsed current waveforms. The coating formed by the bipolar waveform with the wider cathodic pulses showed volcano-like surface morphology with no evidence of large pores at the metal/coating interface. It revealed the highest corrosion performance due to the synergistic effect of TiO2 incorporation and structural/morphological features along with a better passivation behavior indicating no pitting susceptibility. For this coating, the tribocorrosion tests showed no potential drop during sliding under 1 N with the lowest volume loss of 0.022 mm3.

Growth and Characterization of Anodic Films on Scandium

2013

The anodic behavior of Sc in a slightly alkaline aqueous solution is studied. Electrochemical and capacitance measurements suggest that passive films can be formed on the scandium surface under a high electric field. The formation of these layers occurs at low faradaic efficiency due to oxygen evolution. Photoelectrochemical experiments suggest the formation of a barrier layer with a thickness high enough to hinder external electron photoemission processes and allow the estimation of the bandgap of the films as a function of their formation voltage. The estimated bandgap values were lower than that reported for Sc2O3, suggesting the formation of hydrated phases and/or of a strongly oxygen d…

Formation of anodic films on sputtering-deposited Al–Hf alloys

2009

Abstract The growth of barrier-type anodic films at high efficiency on a range of sputtering-deposited Al–Hf alloys, containing from 1 to 95 at.% Hf, has been investigated in ammonium pentaborate electrolyte. The alloys encompassed nanocrystalline and amorphous structures, the latter being produced for alloys containing from 26 to 61 at.% Hf. Except at the highest hafnium content, the films were amorphous and contained units of HfO 2 and Al 2 O 3 distributed relatively uniformly through the film thickness. Boron species were confined to outer regions of the films. The boron distributions suggest that the cation transport number decreases progressively with increasing hafnium concentration i…

Photo-electrochemical investigation of anodic oxide films on cast Ti–Mo alloys. I. Anodic behaviour and effect of alloy composition

2009

Abstract The anodic behaviour of cast Ti–Mo alloys, having different Mo contents (6–20 wt.%), was investigated in acidic and neutral aerated aqueous solutions. All sample showed a valve-metal behaviour, owing to formation and thickening of barrier-type anodic oxides displaying interference colours. Growth kinetics of passive films is influenced by both anodizing electrolyte and composition of the starting alloy. This last parameter was found to change also the solid-state properties of the films, explored by photoelectrochemical and impedance spectroscopy experiments. Thicker films ( U f  = 8 V/MSE) grown on alloys richer in Mo showed more resistive character and a photocurrent sign inversi…

The influence of surface treatment on the anodizing of magnesium in alkaline solution

2011

Abstract The mechanism of magnesium anodizing after mechanical polishing or HF pickling was studied. X-ray Photoelectron Spectroscopy and Photocurrent Spectroscopy were employed to characterize both the initial films formed on Mg soon after surface treatments and the anodic films grown in strongly alkaline solutions. Electrochemical and capacitance measurements were performed in order to study the oxidation process and to check if the kinetic of growth fits the Mott–Cabrera high field model. From Tafel plots it was possible to estimate the activation distance, while the simulation of the barrier layer growth as a function of the potential at high scan rate allowed to estimate the other kine…